970-KA
|
One possible variation of assembly
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
These headers are designed to provide a secure interlocking mechanism when an application will be encountering severe vibrations. The header can also be used with the type 971-FBS (-DS) when interlocking and keying features are not required.
 | Header |
| 970-KA: Extended base to improve to the stability during wave soldering and to increase the strength during plugging and depplugging. |
| End-to-end stackable while maintaining the 5 mm spacing. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 5 mm (0.197 in.)
Recommended Hole Diameter in PC Board: 1.3 mm (0.051 in.)
Contact Resistance: typically 1m ohm
|
| |
|
| |
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
(A) Extended base, 970-KA only
(B) Interlocking latch |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
20 |
300 |
B,D |
|
| CSA |
10 |
300 |
B,D,E |
|
|
|
|
International Approvals:
|
| |
|
| |
| Material |
| |
Molding: Polyamide, UL 94, V-2, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 25%
Solder Pin: Ø 1 mm (0.04 in.), Tin plated copper alloy
|
| |
|
| |
|
