110-V-211
|
One assembly
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
 | Header |
| 110-V-211 is equipped with a poka-yoke feature on each end sidewall. This prevents incorrect misaligned plugging when utilized with 110-A series plugs. |
| Internal features prevent backward insertions |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 3.5 mm (0.138 in.)
Recommended Hole Diameter in PC Board: 1.2 mm (0.047 in.)
|
| |
|
| |
| Illustration |
| |
|
|
Coding keys 120-K are available to prevent the insertion of the wrong plug into a header. These are usually field inserted but can be factory installed if required. These coding keys are visible from the exterior, through slots in the header. Correct keying requires the removal of corresponding keying nibs from the 110-A plugs.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
110-V-111: L = (No. of Poles x Center to Center Spacing) + 0.6 mm
110-V-211: L = (No. of Poles x Center to Center Spacing) + 2.6 mm |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
8 |
300 |
B,D |
|
| CSA |
8 |
300 |
B |
|
|
|
|
International Approvals:
Rated Impulse Withstand Voltage: 2500 V
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Solder Pin: 0.8 x 0.8 mm (0.03 x 0.03 in.), Tin plated copper alloy
|
| |
|
| |
|
