120-M-285
|
One possible variation of assembly
|
Typical Application
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
Type 120-M-285 terminal block has been designed to allow effective potting of PC boards. The molding design prevents seepage of the potting material into the wire clamping area up to 13 mm (0.5 in.) from the board.
 | Header |
| High clearance above PCB |
| Plug-In Direction and Wire Entrance Parallel to PCB when plugged with 120-A-115 |
| Can be installed anywhere on PCB without plugs or wires interfering with other components. The high clearance allows the connection to be located outside of the enclosure. |
| Equiped with screw locking features that secure the plug and header together. This prevents accidental unplugging caused by human error, vibrations, impacts, wire pulling or gravity. Can be installed at any orientation with respect to horizontal. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 5 mm (0.197 in.)
Recommended Hole Diameter in PC Board: 1.4 mm (0.055 in.)
|
| |
|
| |
| Illustration |
| |
|
|
Coding keys 120-K are available to prevent the insertion of the wrong plug into a header. These are usually field inserted but can be factory installed if required.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
(A) Threaded Insert M2.5 |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
15 |
300 |
B |
|
| UL |
10 |
300 |
D |
|
| CSA |
15 |
300 |
B |
|
| CSA |
10 |
300 |
D,E |
|
|
|
|
International Approvals:
Rated Impulse Withstand Voltage: 2500 V
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Solder Pin: 1 x 1 mm (0.04 x 0.04 in.), Tin plated copper alloy
Threaded Insert: M2.5, Copper alloy
|
| |
|
| |
|
