110-P-211
|
One assembly
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
Types 110-P-111 /-211 terminal blocks have been specially designed to allow effective potting of PC boards when terminal block is mounted on PCB edge and wire clamping area is facing outside of the board.
 | Header |
| Double level (rows on same level) |
| Plug-In Direction and Wire Entrance Parallel to PCB when plugged with 110-A-111, 110-A-IDC, |
| 110-P-211 is equipped with a poka-yoke feature on each end sidewall. This prevents incorrect misaligned plugging when utilized with 110-A series plugs. Internal features prevent backwards insertion. |
| 110-P-111 have a small foot print that allows a "in" fit when replacing competitive product. This is especially useful on PCB that are typically completely covered in components. It can be said that misalignment would in principle be prevented by the close components in close proximity. |
| Internal features prevent backward insertions |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 3.5 mm (0.138 in.)
Recommended Hole Diameter in PC Board: 1.2 mm (0.047 in.)
|
| |
|
| |
| Illustration |
| |
|
|
Coding keys 120-K are available to prevent the insertion of the wrong plug into a header. These are usually field inserted but can be factory installed if required. These coding keys are visible from the exterior, through slots in the header. Correct keying requires the removal of corresponding keying nibs from the 110-A plugs.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
110-P-111: L = (No. of Poles x Center to Center Spacing / 2) + 0.6 mm
110-P-211: L = (No. of Poles x Center to Center Spacing / 2) + 2.6 mm
(A) Poka-Yoke feature |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
8 |
300 |
B,D |
|
| CSA |
8 |
300 |
B |
|
|
|
|
International Approvals:
Rated Impulse Withstand Voltage: 2500 V
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Solder Pin: 0.8 x 0.8 mm (0.03 x 0.03 in.), Tin plated copper alloy
|
| |
|
| |
|
