110-P-225
|
One assembly
|
| |
 |
| |
| Description |
| |
Type 110-P-225 terminal block has been specially designed to allow effective potting of PC boards. The molding design prevents seepage of the potting material into the wire clamping area up to 21 mm (0.83 in.) from the board.
 | Header |
| Double level (rows on same level) |
| Plug-In Direction and Wire Entrance Perpendicular to PCB when plugged with 110-A-115 |
| Equiped with screw locking features that secure the plug and header together. This prevents accidental unplugging caused by human error, vibrations, impacts, wire pulling or gravity. Can be installed at any orientation with respect to horizontal. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 3.5 mm (0.138 in.)
Recommended Hole Diameter in PC Board: 1.2 mm (0.047 in.)
|
| |
|
| |
| Illustration |
| |
|
|
Coding keys 120-K are available to prevent the insertion of the wrong plug into a header. These are usually field inserted but can be factory installed if required. These coding keys are visible from the exterior, through slots in the header. Correct keying requires the removal of corresponding keying nibs from the 110-A plugs.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = (No. of Poles x Center to Center Spacing / 2) + 10.3 mm
(A) Threaded Insert M2.5 |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
8 |
300 |
B,D |
|
| CSA |
8 |
300 |
B |
|
|
|
|
International Approvals:
Rated Impulse Withstand Voltage: 2500 V
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Solder Pin: 0.8 x 0.8 mm (0.03 x 0.03 in.), Tin plated copper alloy
Threaded Insert: M2.5, Copper alloy
|
| |
|
| |
|
