950-RFL-DS
|
One possible variation of assembly
|
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
A restrainable plug for discrete wiring.
Screw tightened wires entries with captive screws.
The insertion and extraction forces can be adjusted and specified to costumer requirements.
 | Plug |
| Solid version |
| Low profile |
| Wire entrance perpendicular or parallel to PC Board |
| Plug-In Direction Parallel to PCB and Wire Entrance Perpendicular to PCB when plugged with 950-SLS |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 5 mm (0.197 in.)
Nominal Cross Section: 1.5 mm2 (2325 mils2)
Wire Stripping Length: 6 mm (0.25 in.)
|
| |
|
| |
| Application |
| |
The lateral latching features are used to secure the plug to a suitable header, latching device, housing, base or chassis. This mitigates the effects of vibration caused loosening and accidental disconnections. This could also permit an installation where the connector is placed upside down or sideways relative to the PCB.
|
| |
|
| |
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = No. of Poles x Center to Center Spacing |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
10 |
300 |
B |
26-14 |
| CSA |
10 |
300 |
B,D,E |
26-14 |
|
|
|
Screw Tightening Torque:
UL: 3.5 lbfin
CSA: 0.4 Nm
Rated Impulse Withstand Voltage: 2500 V
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 32%
Terminal Body: Nickel plated copper alloy
Wire Protector and Contact Spring: Tin plated copper alloy
Screw: M2.6, Slotted head, zinc plated blue passivated, steel substrate
|
| |
|
| |
|
