110-AP-211
|
One possible variation of assembly
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
110-AP are provided to be plugged directly onto PCB having a standard thickness 1.6 mm. Slots must be cut in PCB to accomodate connector contact shroud. The correct positioning of the plug connections on the conductor strips is determined by slots that communicate with the side walls of the moulding or by the width of the PCB itself. Single-sided or double-sided contact results from the stacking of the PCBs. Grooves between the plug connections not only serve to increase the length of the creepage distances in the moulding, but also to accept coding strips.
 | Plug |
| Card edge connector |
| Wire entrance parallel to PC Board |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 3.5 mm (0.138 in.)
Nominal Cross Section: 1.5 mm2 (2325 mils2)
Wire Stripping Length: 6 mm (0.25 in.)
|
| |
|
| |
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = No. of Poles x Center to Center Spacing
(A) PCB layout (for either side of PCB)
(B) Slot
(C) Goldfinger |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
7 |
150 |
B |
30-16 |
| CSA |
|
|
|
|
|
|
|
* This product is marked as a Recognizedcomponent for Canada and the United States, cRUus.
Screw Tightening Torque:
UL: 2.0 lbfin
International Approvals:
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing UL 94, V-0, color grey
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Terminal Body: Nickel plated copper alloy
Wire Protector and Contact Spring: Tin plated copper alloy
Screw: M2, Tin plated copper alloy
Thickness of PCB: Standard 1.6 mm,
|
| |
|
| |
|
