|
Raised Base
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
The -FU designation provides a higher profile and therefore higher creepage distances to meet certain VDE design requirements.
 | Raised base |
| Recommended mounting hardware: M4 pan head screw (#8-32 pan head screw) or similar sized sheet metal screw, self-tapping screw or rivet. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: 14.5 mm (0.571 in.)
Nominal Cross Section: 16 mm2 (24796 mils2)
Wire Stripping Length: 9 mm (0.35 in.)
|
| |
|
| |
| Application |
| |
The panel and chassis mounted series are ideal for connecting electrical control panels to external power sources, signal sources, other electrical panels and electrical loads of many types and sizes. The electrical panel's or electrical enclosure's internal components and circuitry are connected to their appropriate external electrical circuitry through these terminal blocks. The screw tightened connections result in high contact forces thus promoting safe wire secureness and retention, low electrical resistance and safe reusable connections. All wire retention screws are captive in their towers and they cannot fall out during transportation, installation and use. Wire protectors are available to protect small gauge stranded wires from screw damage.
These terminal strips can be completely enclosed within the enclosures or be placed at an enclosure opening with one side accessible for external cabling and the other for internal wiring. They can be specially marked to your specifications.
|
| |
|
| |
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
Length of Connector (L)
L = No. of Poles x Center to Center Spacing - 3 mm |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Approval Information |
| |
UL File No.E69841  |
CSA File No.LR24322  |
| |
 |
Rating
|
 |
Current(A)
|
|
Voltage(V)
|
|
Application
group
|
|
AWG
|
| UL |
80 |
600 |
B,C |
14-4 |
| CSA |
80 |
600 |
B,C,D,E |
14-6 |
|
|
|
* Version HDS is UL recognized for 65 A, 14-6 AWG.
Screw Tightening Torque:
UL: 16.0 lbfin
CSA: 1.8 Nm
International Approvals:
|
| |
|
| |
| Material |
| |
Molding: Polyamide, self extinguishing to UL 94, V-0, color off-white
Temperature limits:
Short Time: 140°C (284°F)
Continuous: RTI 105°C (221°F)
Low Limit: -40°C (-40°F)
Comparative Tracking Index: CTI≥600V
Oxygen Index Rating: 33%
Terminal Body: Nickel plated copper alloy
Wire Protector: Stainless steel strip
Screw: M5, Slotted head, zinc plated blue passivated, steel substrate
|
| |
|
| |
|
