|
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
Type 970-J1: These “U” shaped jumpers are suitable for all section A terminal blocks which have 5 mm (0.197 in.) or 5.08 mm (0.200 in.) center to center spacing. They are intended for connecting adjacent poles and are secured by the wire clamping screw. The spacing of the jumper was purposely made 4 mm, so that 2 jumpers can fit side-by-side in the same hole.
The 970-J1 jumpers cannot be installed together with type 970-WG wire guide.
 | For use on all section A and C terminal blocks which have 5.0 mm (0.197 in.) or 5.08 mm (0.20 in.) center to center spacing. |
| For connecting two adjacent poles or multiple adjacent poles. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: For use on all section A and C terminal blocks which have 5.0 mm (0.197 in.) or 5.08 mm (0.20 in.) center to center spacing.
Connects two poles to one so you can daisy chain a series of contacts together to the same common electrical potential.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Material |
| |
Tin plated copper alloy
|
| |
|
| |
|
