|
|
RoHS WEEE Pb free surface compliant
|
|
| |
 |
| |
| Description |
| |
Type 970-J2 acts as a dual wire protector as well as a jumper which connects adjacent poles . The design is suitable for series 96 and 97 terminal blocks. The jumper is incorporated in the assembly of the connector and does not interfere with the clamped wire.
The 970-J2 jumpers cannot be installed together with type 970-WG wire guide.
 | For use on all series 96 and 97 terminal blocks which have 5.0 mm (0.197 in.) or 5.08 mm (0.20 in.) center to center spacing. |
| Factory installed option. For connecting two adjacent poles. |
|
| |
|
| |
| Technical Data |
| |
Center to Center Spacing: The dual wire protector are available for use on all series 96 and 97 terminal blocks which have 5.0 mm (0.197 in.) or 5.08 mm (0.20 in.) center to center spacing.
Connects two poles to one.
Factory installed, not orderable.
|
| |
|
| |
|
|
 |
| |
| Dimensions: mm (in.) |
| |
| |
| When locating connector, allow 0.5 mm clearance around it for process-induced variations. |
|
| |
| Material |
| |
Tin plated copper alloy
|
| |
|
| |
|
